ENOVENETA

Today pneumatic diaphragm presses are fundamental for the production of high quality must.

The pneumatic press operates on the principle of a gradual, uniform gentle diaphragm action so that skins and seed remain intact.

The diaphragm, blown by compressed air, permits pressing of fresh and fermented grapes.

The ENOVENETA press is controlled by a PLC via which various programs can be set with both traditional and champenoise pressing cycles.

These programs can be modified and adapted to the specific requirements of the individual operator who can vary times, pressures, rotation and duration.

Specifications:

• Built entirely in 304 stainless steel
• Self supporting frame
• Two side doors for easy access to cylinder
• Large sliding loading door
• Wheels provided with locking device
• Axial loading valve
• Diaphragm made of non toxic material
• Liquid collection tank
• Centrifugal vane compressor combined with blower
• Self braking motor for cylinder rotation
• Control panel with programmable computer (PLC)
• Cylinder approved in accordance legal requirements and current regulations.

On Request:

• Device with level probes for control of liquid in collection tank
• Acoustic device signalling end of filling
• Acoustic device signalling end of filling and loading pump stop command
• Valve for must selection in automatic mode
• Raised element on frame
• Closed tank
  

VELO PNEUMATIC PRESSES

Specifications:

• Pressing cage with optimum drainage/filtration ratio granting uniform performances on the whole surface
• Membrane in non toxic, heat sealable material
• Standard series axial feeding
• Lateral door equipment with safety locking device
• Uniform distribution of the pressed product and crumbling/conveying possibility during the unloading phase
• Pre assembled air compressor and vacuum unit
• Self braking gear motor rotation drive
• Multi phase automation control panel
• Pressure vessel ISPESL Certification

On Request:

• Computer automation
• CIP washing
• Model for fruits
  

HAND PRESSES

Mechanic and hydraulic lever presses - series "Super"

Wine-presses with central screw, swaged basin with radial reinforcements, hinged closure with sliding pins, seasoned beech wooden cage and spacers, cast iron movement.

According to the different models, the wine-press can be supplied as follows:

• with a welded or a fixed (with nut and gasket) central screw
• with mechanical or hydraulic movement
• with basin on tripod or on wheels.

ENOVENETA HYDRAULIC PRESSES

Constructed entirely in steel with ground chromium-plated pistons; supplied with automatic electric control panel, with gauge with electric micro contacts.

Adjustable pressure from 30 - 350 ATM. Automatic re-starting and stopping until final pressing is effected.

Constructed in two versions: with one or two extractable cages.

Stainless steel bucket option available.